Pub. 42004-550A
Elemec3 Console Manual—Version 3.0 Page 20 of 114
P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-550A.docx
09/20
Global Audio Mix Setup
Click the GLOBAL MIX button, on the SYSTEM PROPERTIES screen, to open the GLOBAL AUDIO MIX
SETUP screen (see Figure 19). This screen specifies the mixing, attenuation, and not mixing properties of
system audio. Mixed audio plays without attenuation. Attenuated audio mixes at the attenuation level
specified in the GLOBALS panel on the SYSTEM PROPERTIES screen. This is a global setting.
Event groups have their own unique mix configuration that affects the playback of the events within the
group. Configure mixing for event groups on the EVENT GROUP screen (see the Event Groups section).
Attenuation Threshold—priority that determines attenuation of playback events when mixed with live
speech. All events at or above the selected threshold will attenuate the playback events when mixed with
listed live speech events.
Mix Threshold—priority that determines what playback events mix without attenuation with live speech.
All events at or above the selected threshold will not attenuate playback events when mixed with listed
live speech events.
Not Mixed—lists all live speech and playback events not listed in the MIXED WITH PLAYBACK list.
** Important Programming Note **
If the configuration requires live speech audio to mix with playback audio, then the priority of the live
speech event(s) must be lower than the playback event(s), and the above mix setup must be set up to
achieve that.
If the live speech event(s) have a higher priority than the playback event(s), the live speech event(s) mutes
(overrides) the playback event(s).
Figure 19. Global Audio Mix Setup
To Next Page
Loading...
