Pub. 42004-550A
Elemec3 Console Manual—Version 3.0 Page 34 of 114
P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-550A.docx
09/20
Figure 35. Access Panel Button Configuration
Editing:—displays the button panel configuration name. Displays the access panel name when
configuring the buttons for an individual access panel.
Import…—Click IMPORT… to copy an existing button configuration to the current configuration. Copy
from one panel to another, from a button panel to the template, or from the template to a panel.
Button Properties
The BUTTON PROPERTIES pane in the center of the screen contains a representation of the button panel
with the fields used to define each button above it. Each button has a type, appearance, and additional
unique properties for the required functionality in the system design.
Create and Modify AP Buttons
Click a button in the button panel and make the necessary selections from the available fields in the
BUTTON PROPERTIES pane above to define each required button.
NOTE: Selecting a button type with required settings makes the fields to completely define the button the
only selectable elements on screen. To abandon the current button definition or exit the ACCESS
PANEL BUTTON CONFIGURATION screen, set the button’s type to NOT PRESENT.
To Next Page
Loading...
