Hubbell GAI-TRONICS E3 - Controller Connection Loss

Pub. 42004-550A
Elemec3 Console Manual—Version 3.0 Page 7 of 114
P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-550A.docx
09/20
Configure System Audio Muting Parameters
Action
Screen
Set the global muting parameters:
• Edit the descriptions for global mutes 1–4.
• Set holdover delay time for each global mute.
Set the mute threshold for playback events.
Set the mute threshold for live speech events.
System Properties → Global Audio Mix
Setup (on page 20)
Install the E3 Console Application
Download and install Adobe AIR from www.adobe.com.
Run ElemecConsole3.air to install the Elemec3 Console application. There is no need to uninstall an
existing Elemec3 Console application; the installer will prompt for instructions.
Run the E3 Console Application
Start the Elemec3 Console application from the Start Menu. Go to Programs → GAI-Tronics
Corporation and click on ElemecConsole3. Optionally, double click the desktop shortcut, if created
during the installation process.
Figure 1. Create New or Load Existing Configuration