The odometer can be enabled/disabled in setup, (service mode) showing weight
savings, money savings or both. Within “Balancing Limits” setup, choose the display
of SmartWeight Odometer or/and per-spin savings. Factory default is the display of
odometers and no per-spin display.
Show Savings Summary
When the SmartWeight Odometer is present on screen, press the “Show Savings
Summary” softkey for detailed explanation of savings.
NOTE: “Show Savings Summary” will be “projected savings” when
selected time frame exceeds actual time of use.
A summary of the savings due to SmartWeight is displayed.
NOTE: “Set Assumptions” key available in “Service Mode” only.
Rolling the selector knob will change from Daily to Weekly to Monthly Yearly and Five
Year savings.
Select “Print Screen” to print the weight savings displayed.
20
Introduction to Balancing GSP9720JLR Wheel Balancer Operation Instructions
To Next Page
Loading...
