1. GETTING STARTED
1.1 Introduction
This manual provides operation instructions and information required to operate the
GSP9720JLR Balancer. Read and become familiar with the contents of this manual
prior to operating the GSP9720JLR.
The owner of the GSP9720JLR is solely responsible for arranging technical training.
The GSP9720JLR is to be operated only by qualified trained technicians. Maintaining
records of personnel trained is solely the responsibility of the owner and
management.
This manual assumes the technician has already been trained in basic balancing
procedures.
References
This manual assumes that you are already familiar with the basics of tire balancing.
The first section provides the basic information needed to operate the GSP9720JLR.
The following sections contain detailed information about equipment operation and
procedures. “Italics” are used to refer to specific parts of this manual that provide
additional information or explanation. For example, refer to “GSP9720JLR
Components,” page 8. These references should be read for additional information to
the instructions being presented.
1.2 For Your Safety
Hazard Definitions
Watch for these symbols:
CAUTION: Hazards or unsafe practices, which could result in minor
personal injury or product or property damage.
WARNING: Hazards or unsafe practices, which could result in
severe personal injury or death.
DANGER: Immediate hazards, which will result in severe personal
injury or death.
These symbols identify situations that could be detrimental to your safety and/or
cause equipment damage.
GSP9720JLR Wheel Balancer Operation Instructions Getting Started
1
To Next Page
Loading...
