To initiate RimScan™, pull the inner Dataset
®
arm away from the weight tray and turn
to the down position.
The rim profile can be scanned starting with the rim lip, or from the inside of the
wheel. Place the Dataset
®
arm against the rim at the desired location, depress and
hold the foot pedal. The RimScan draw screen will automatically appear.
As shown below, draw the Dataset
®
arm across the rim to produce an on-screen, live
progress of the wheel representation. While it is not necessary to “draw” slowly with
the Dataset
®
arm, it will produce a more accurate representation of the rim profile
especially with rims having multiple steps or taper.
GSP9720JLR Wheel Balancer Operation Instructions Balancing Procedures
73
To Next Page
Loading...
