11
PROGRAMMING THE CONTROLLER
4. The day will be ashing and the icon
will be displayed. Use the
or
buttons to change the day. Press the
button to proceed to setting the time.
5. The time will be displayed. Use the
and
buttons to select AM, PM, or 24
hour. Press the
button to move to
hours. Hours will be ashing. Use the
and buttons to change the hour
shown on the display. Press the
button
to move to minute. Minutes will be
ashing. Use the
and buttons to
change the minutes shown on the display.
The date, day, and time have now been set.
Setting the Program Start Time(s)
1. Turn the dial to the START TIMES
position.
2. The factory preset is set on program A.
If necessary, you can select program B
or C by pressing the
button.
3. Use the
or button to change the
start time. (The start times advance
in 15-minute increments).
4. Press the
button to add an additional
start time, or
button for the next program.
The XC Hybrid display shows the time and day when the
controller is idle. The display changes when the dial is rotated
to indicate the specic programming information to enter.
When programming, the ashing portion of the display can
be changed by pressing the
or buttons. To change
something that is not ashing, press the
or buttons until
the desired eld is ashing.
Three programs (A, B, and C — each with the ability to have
four daily start times) permit plants with dierent watering
requirements to be separated on dierent day schedules.
NOTE: A basic programming rule is that whatever
symbol or character is ashing will be the item
programmed. For instance, if the hour is ashing
when setting the time, the hour can be changed or
programmed. For illustration purposes in this manual,
ashing characters are in GRAY type.
Setting the Date and Time
1. Turn the dial to the CURRENT TIME/DAY
position.
2. The current year will be flashing. Use
the
or buttons to change the
year. After setting the year, press the
button to proceed to setting the month.
3. The month and day will be in the display.
The month will be ashing and the
icon will be displayed. Use the
or
buttons to change the month. Press the
button to proceed to setting the day.
CURRENT TIME/DAY
START TIMES
To Next Page
Loading...
