Hunter XC Hybrid - Battery Installation

6
Battery Power
The XC Hybrid Plastic operates on six AA alkaline batteries,
and the XC Hybrid Stainless uses six alkaline C batteries. A
battery carrier is supplied with your controller. Insert the
batteries as indicated on the battery carrier.
• XC Hybrid-Plastic Battery Install Connect the battery
connector inside the access compartment to the battery
carrier and insert the carrier into the lower le side of the
controller as shown.
• To access battery carrier on the XC Hybrid Stainless,
remove the screw in the top center of the controller and
swing the facepack down as shown.
• XC Hybrid Stainless Steel Solar comes out-of-the-box
ready to install and program. Place the controller in full
sunlight. Turn the dial to the Run position to activate solar
charging.
INSTALLING BATTERIES
PRG
ACTIVE
SENSOR BYPASS
Battery Carrier
XC Hybrid Stainless
XC Hybrid-Plastic
XC Hybrid Stainless
Steel Solar