Hunter XC Hybrid - Configuring Station Run Times and Watering Days

12
Setting Days To Water
1. Turn the dial to the WATER DAYS position.
2. The display will show the last program
selected (A, B, or C). You can switch to
another program by pressing the
button.
3. The controller will display the seven days of the
week (MO, TU, WE, TH, FR, SA, SU). Each day will
have a
icon or a icon above the day. The icon
would represent an “On” water day, while a
icon
would represent an “O” watering day.
Selecting Specic Days of the Week to Water
1. With the cursor on a specic day (the
cursor will always start with MO), press
the
button to activate a particular
day of the week to water. Press the
button to cancel watering for that
day. Aer pressing a button the cursor
automatically advances to the next day.
2. Repeat step 1 until all desired days have been
selected. The selected days will show a
to
indicate their status is ON. The last
is the
last day of watering for that program.
NOTE: One start time will activate all stations sequen-
tially in that program. This eliminates the need to enter
each station’s start time. Multiple start times in a
program can be used for separate morning, aernoon,
or evening watering cycles. Start times may be entered
in any order. The XC Hybrid will automatically sort them.
Eliminating a Program Start Time
With the dial set to the START TIMES
position, push the
or button until
you reach 12:00 AM (midnight). From
here, push the
button once to reach
the OFF position.
Setting Station Run Times
1. Turn the dial to the RUN TIMES
position.
2. The display will show the last program
selected (A, B, or C), the station
number selected,
icon, and the
station will be ashing. You can switch
to another program by pressing the
button.
3. Use the
or button to change the
station run time on the display. You can
set the run times from 0 to 4 hours.
4. Press the
button to advance to the
next station.
PROGRAMMING THE CONTROLLER
START TIMES
RUN TIMES
WATER DA
YS
SuSuMoMo TuTu WeWe ThTh FrFr SaSa