Hunter XC Hybrid - Automatic Watering, System Off, and Rain Delay

14
the display will show normal time of day and normal irrigation
will resume at the next scheduled start time.
Seasonal Adjustment
Seasonal Adjust is used to make global
run time changes without re-program-
ming the entire controller. To use the
seasonal adjustment feature:
1. Turn the dial to the SEASONAL
ADJUSTMENT position.
2. The display will now show a flashing
number followed by a %, as well as the
bar graph which always remains on the display. Press the
or button to adjust the percentage of the seasonal
adjustment. Each bar on the graph represents 10%. This
feature can adjust the controller from 10% to 150% of the
original program.
To view the adjusted run times, simply turn the dial to the
RUN TIMES position. The displayed run time will be updated
accordingly as the seasonal adjustment is made.
NOTE: The controller should always be initially
programmed in the 100% position.
Automatic Watering
Aer programming, set the dial to the RUN
position to enable automatic execution of all
selected watering programs and start times.
System O
Valves currently watering will be shut o aer
the dial is turned to the SYSTEM OFF position
for two seconds. All active programs are dis-
continued and watering is stopped. To return
the controller to normal automatic operation,
simply return the dial to the RUN position.
Programmable Rain O
This feature permits the user to stop all
programmed waterings for a designated
period from 1 to 7 days. At the end of the
programmed rain o period, the controller
will resume normal automatic operation.
1. Turn the dial to the SYSTEM OFF
position. Wait for OFF to be displayed.
2. Press the
button as many times as
needed to set the number of days o
(up to 7 days).
3. Turn the dial back to the RUN position
at which OFF, a number, the
and
icons will be displayed.
The days o remaining will decrease at
midnight each day. When it goes to zero,
PROGRAMMING THE CONTROLLER
SEASONAL
ADJUSTMENT
SYSTEM OFF
RUN
RUN
SYSTEM OFF