Hunter XC Hybrid - Pole Mount Installation Guide; Pole Mounting Preparation and Base Setup

18
POLE MOUNT INSTRUCTIONS
① ②
• Dig a 12" x 12" x 18"
(30 x 30 x 45 cm) hole.
• Mix and pour in three 90 lb.
(40 kg) bags of cement.
• Make sure the pole is
vertical and the opening in
the wire sweep is accessible
and unclogged.
NOTE: Make sure the cement
pad is dry before continuing
with the installation.
• Place the mounting plate
on top of the pole.
• Secure the mounting
plate with two carriage
bolts and two nuts until
the plate does not twist
or turn.
Included:
• Six carriage bolts – ⁄" (5 mm approx.) diameter • Six nuts – ⁄" (5 mm approx.) diameter
18"
(45 cm)
12"
(30 cm)
18"
(45 cm)
12"
(30 cm)