HunterDouglas UltraGlide - Tools and Fasteners Needed

2
GETTING STARTED
Thank you for purchasing Hunter Douglas Silhouette
®
Halo
™
Duolite
®
Window Shadings.
With proper installation, operation, and care, your new shadings will provide years of beauty
andperformance.
Please thoroughly review this instruction booklet before beginning the installation. If your
shading has a protective plastic cover on the fabric-covered headrail, keep the plastic in place
until the shading is installed.
IMPORTANT: An orange shipping clip is installed in the headrail for the UltraGlide
®
shading.
Please do not remove the clip until instructed to do so.
Tools and Fasteners Needed
■
1
⁄ 4 " hex and flat blade screwdrivers
■
Level (laser level is recommended)
■
Measuring tape and pencil
■
Pliers
■
Power drill,
3
⁄ 32 " drill bit,
and
1
⁄ 4 " hex driver
■
Scissors (heavy-duty)
■
1
⁄ 16 " Allen wrench
In addition, you will need fasteners designed to work with your specific mounting surface(s).
■
#6 Hex Head Screws (Provided). Two 1
1
⁄ 2 " screws are provided per installation bracket.
■
Longer #6 Hex Head Screws (Not Provided). If using spacer blocks, use #6 screws
long enough for a secure attachment.
■
Speed Nuts and Screws (Provided). Extension brackets come with screws and speed nuts.
■
Rechargeable Battery Wand Spacer Block Kit (Provided with Rechargeable Battery
Wand Option). Two spacer blocks and two #8 2½" screws are in the kit.
■
Outside Mount Battery Wand Spacer Block Kit. Available separately in ½" and ¼".
■
Drywall Anchors (Not Provided). Use drywall anchors when mounting into drywall.
Speed Nut
and Screw
(Provided with Each
Extension Bracket)
#6 x 1½"
Hex Head Screw
(Provided)
Longer #6 Hex Head Screw
for Use with Spacer Blocks
(Not Provided)
Outside Mount
Battery Wand
Spacer Block Kit
(Available in both
½" and ¼")
Rechargeable Battery Wand
Spacer Block Kit
(Provided with Rechargeable
Battery Wand)
1
∕ 2 "
1
∕ 2 "