HunterDouglas UltraGlide - Resetting the Shading (If Necessary); Calibration Reset; Resetting Shading Programming; Electronic Limit Adjustments

OPERATION
24
Operating the PowerView App and Gen 3 Remote
Syncing and Programming Your Remote
■
Activate the remote by pulling both plastic tabs from the back battery compartment.
■
Download the PowerView
®
App for your smartphone or tablet at hdpvapp.com.
■
Open the PowerView App and follow the steps to set up your new shading and remote.
■
Use the PowerView App to program and manage your PowerView Gen 3 remote(s)
as accessories.
■
For more details, refer to the digital PowerView Gen 3 Automation Remote Control Guide.
Basic Operation
■
Wake up the remote by picking it up or pressing ■ STOP.
■
Press group number(s) 1, 2, 3, 4, 5, and/or 6 to select one or more groups. Selected group
numbers light up white on the remote.
■
Press selected group number(s) 1, 2, 3, 4, 5 and/or 6 a second time to deselect one or
more groups. Deselected group numbers are not lit.
- Quickly press twice
to send shading to
your second Favorite
position**
OPEN
- Raises back panel
and front shading
CLOSE
- Lowers front shading
and closes vanes
- Quickly press twice
to lower front shading,
over-rotate vanes,
and lower back panel
LEFT ARROW
- Closes vanes
RIGHT ARROW
- Opens vanes
- Quickly press twice
to over-rotate vanes
STOP
- Stop shading motion
- Stop vane motion
FAVORITE
- Press once to send
shading to your first
Favorite position*
GROUP NUMBERS
Each number represents
a different group
*The default first Favorite position is the front shading(s) at 50% open.
**Both Favorite positions can be updated in the PowerView App > Shade Settings.
ALL
- Press to select
all groups