Husqvarna 455 Rancher II - Cutting equipment

10 – English
Displacement Cylinder diameter Stroke Max. output/speed
cm3/cubic inch Ø mm/Ø inch mm/inch kW/hp/rpm
455 RII: 55.5 / 3.38 47 / 1.85 32 / 1.26 2.6 / 3.5 / 9,000
455e RII: 55.5 / 3.38 47 / 1.85 32 / 1.26 2.6 / 3.5 / 9,000
455e RII TB: 55.5 / 3.38 47 / 1.85 32 / 1.26 2.6 / 3.5 / 9,000
465 RII: 64.1 / 3.91 49 / 1.93 34 / 2.07 3.2 / 4.4 / 9,600
Electrode gap Ignition system Air gap Carburetor type
mm/inch mm/inch
455 RII: 0.5 / 0.02 SEM DM61 0.3 / 0.012 Walbro AT3
455e RII: 0.5 / 0.02 SEM DM61 0.3 / 0.012 Walbro AT3
455e RII TB: 0.5 / 0.02 SEM DM61 0.3 / 0.012 Walbro AT3
465 RII: 0.5 / 0.02 SEM DM61 0.3 / 0.012 Walbro AT9
Usable cutting length Chain speed at 133% of Chain pitch Drive link
cm/inch max. engine power speed, m/s mm/inch mm/inch
455 RII: 36-49 / 14-19 26,6 / 9,000 8.25 / 0.325, 9.52 / 3/8 1.5 / 0.058
455e RII: 36-49 / 14-19 26,6 / 9,000 8.25 / 0.325, 9.52 / 3/8 1.5 / 0.058
455e RII TB: 36-49 / 14-19 26,6 / 9,000 8.25 / 0.325, 9.52 / 3/8 1.5 / 0.058
465 RII: 36-69 / 14-27 28,5 / 9,600 9.52 / 3/8 1.5 / 0.058
3 Technical data
Technical data