Husqvarna 455 Rancher II - Service Data

14 – English
5 Service data
Service data
1-1,5Nm
20Nm
1,5-2,5Nm 4mm
1-2Nm
11-13Nm 13mm
12-14 Nm 5mm
1-2Nm
13-15Nm 4mm
18-25Nm 16mm
12-14Nm 13mm
1,5-2Nm 4mm
5-6Nm 4mm
1-2Nm
3-4Nm 4mm
22-25Nm 13mm
The numbers by the components to be assembled
with screws state the tightening torque in Nm.
s = Lubricate using two-stroke oil.
n = Lubricate using chain oil.
l = Lubricate using grease.
Key