Husqvarna 455 Rancher II - Dismantling the Crankcase and Crankshaft

52 – English
7.25 Dismantling the crankcase and
crankshaft
1
Dismantle the following:
• clutch cover
• chain and bar
• cylinder cover
• starter *
• centrifugal clutch *
• carburetor*
• mufer *
• handle system
• hand guard
• piston and cylinder*
* See specic instruction.
Fig 68
NOTE!
Take care to prevent any dirt or foreign
particles from entering the bearings.
2
Lift the complete crankshaft out of the crankcase.
See gure 68.
Repair Instructions