Automower from 81
4. Autocheck, Service program
™
Operating history: Fault memory
This list displays the last 100 faults to occur. The fault
is displayed with the date and time and where the last
fault to occur is shown at the top of the list.
You can change the displayed order as required:
• Click on Date to change between the between first
and last faults.
• Click on Fault to show the faults in alphabetical
order.
Selecting a row with a specific fault from the fault list,
displays an extract from the fault tracing guide (see
page
118) in the Fault tracing box. To the left of the
box the possible cause of the fault is listed, and to the
right fault tracing tips and actions are stated.
Clicking on the Table, frequency button allows you to
display a summary of the faults that have occurred on
the connected mower and how many times each fault
has occurred. Click on the Table, latest button to
revert to the list with the last 100
faults.
All occurring faults saved in the fault memory can be
deleted:
1. Click on Clear Fault memory.
2. Click Yes when asked Clear fault memory list?
3012-575
To Next Page
Loading...
Need help?
General
