92 Automower from
4. Autocheck, Service program
™
Settings: Miscellaneous
Here you can temporarily deactivate the mower's Loop
detection, set the mower in Demo mode, activate
STOP button override, change the setting for Square
mode cutting and reset all settings and save and
transmit Customer settings.
Settings: Square mode cutting
When an Automower rarely seems to perform square
mode cutting or performs it too often, and the other
actions have not helped (see
1.6 Square mode
cutting on page 9), the problem may be rectified by
lowering respective increasing the value for Square
mode cutting:
The higher the value, the more seldom Automower
will carry out square mode cutting and vice versa.
1. State a new value that is lower or higher than
50%, for example, 40% or 60%.
2. Click on Present in the Change program box.
Make an evaluation after the mower has worked for
a
few days.
3012-588
3012-589
To Next Page
Loading...
Need help?
General
