What to do if Hygiena Test Equipment shows 'Memory full warning'?
If your Hygiena Test Equipment displays a 'Memory full warning', clear the memory to free up space. This will allow you to continue using the device without issues.
What to do if Hygiena SystemSURE Plus requires calibration self-checks?
When your Hygiena Test Equipment requires calibration self-checks, remove the testing device and close the lid as instructed.
What to do if Hygiena SystemSURE Plus Test Equipment batteries are low?
If the batteries in your Hygiena Test Equipment are low, replace them to ensure proper functionality.
What to do if Hygiena SystemSURE Plus shows 'Invalid date entered'?
If your Hygiena Test Equipment displays 'Invalid date entered', check the date and enter the correct one.
What to do if Hygiena Test Equipment shows 'Invalid program threshold limits entered'?
If your Hygiena Test Equipment displays 'Invalid program threshold limits entered', check the program threshold limits and enter valid ones.
What to do if Hygiena SystemSURE Plus shows 'Memory erase requested'?
If your Hygiena Test Equipment displays 'Memory erase requested', confirm and execute memory erase.
General| Detection Method | ATP Bioluminescence |
|---|---|
| Operating Temperature | 5°C to 40°C (41°F to 104°F) |
| Power Source | 2 AA batteries |
| Display | LCD |
| Connectivity | USB |
| Resolution | 1 RLU |
| Measurement Range | 0 to 9999 Relative Light Units (RLU) |
| Battery Type | AA |
| Accuracy | ±5 RLU or ±5% (whichever is greater) |
Explains Adenosine Triphosphate (ATP) as an energy molecule and its role as a cleanliness indicator.
Describes the chemical reaction (Luciferin/Luciferase + ATP = Light) used to detect ATP.
Explains Relative Light Units (RLU) as the measurement output and its comparison to thresholds.
Lists various ATP test devices and accessories compatible with the luminometer.
Details the function of each button on the luminometer's keypad.
Provides instructions on how to install AA alkaline or rechargeable batteries.
Explains the procedure for powering the luminometer on and off.
Describes the LCD display layout and defines various status icons.
Explains the low battery warning icon and its states.
Details the automatic power-off feature to conserve battery.
Describes the automatic 15-second calibration process upon startup.
Explains the warning displayed when the internal memory is nearly full.
Describes how to manage and select User IDs for test result tagging.
Explains programming test locations and setting pass/fail thresholds.
Details creating and selecting Test Plans with up to 251 test locations.
Refers to external guides for setting pass/fail limits.
Instructions on how to access and view previously stored test results.
How to analyze stored results and view statistical data.
Procedures for permanently deleting stored test results.
How to set the internal clock and date format.
Manual adjustment of LCD contrast for readability.
Configuration of the Quick Boot feature for faster startup.
Setting the automatic power-off timer to conserve battery.
Option to display text in bold for improved legibility.
Controls whether tests are automatically recorded to memory.
Step-by-step guide for performing a sample measurement.
Procedure for retesting a previously failed sample measurement.
General conditions and warranty disclaimers for the software.
Lists the minimum system requirements for installing the software.
Instructions on how to begin the software installation.
Information on accessing the user manual for SureTrend software.
Guide for installing the necessary driver for the USB smart cable.
Instructions for cleaning the exterior of the luminometer.
Guidance on how to replace the unit's batteries.
Steps for cleaning or replacing the protective pocket.
Lists common beep types and their possible causes.
General advice for diagnosing and resolving unit malfunctions.
Lists common error codes and their potential causes.
Specifies the duration of the product warranty.
Details specific actions that will void the warranty.
To Next Page
