Table of Contents
1. INTRODUCTION _____________________________________________________ 1
1.1 WHATISATP?_____________________________________________________ 2
1.2 HOW DOESTHELUMINOMETERWORK?____________________________________ 2
1.3 WHATISAN RLU? __________________________________________________ 2
1.4 TESTDEVICESAND ACCESSORIES_________________________________________ 3
2. LUMINOMETERDESCRIPTION__________________________________________ 4
2.1 KEYPADSYMBOLS ___________________________________________________ 4
2.2 INSTALLINGBATTERIES________________________________________________ 5
2.3 TURNINGTHELUMINOMETERON AND OFF__________________________________ 6
2.4 DISPLAYLAYOUTAND ICONS____________________________________________ 7
2.5 LOW BATTERYINDICATOR______________________________________________ 7
2.6 POWERSAVINGSTANDBYMODE_________________________________________ 8
2.7 INTERNALCALIBRATION _______________________________________________ 8
2.8 LOW MEMORYWARNING _____________________________________________ 8
3. SET-UPMENU OPTIONS_______________________________________________ 9
3.1 USERID_________________________________________________________ 10
3.2 SETTINGUPPROGRAM TEST POINTSAND PASS/FAILLIMITS _____________________ 10
3.3 TESTPLANS ______________________________________________________ 11
3.4 ESTABLISHINGATPPASS/ FAILLIMITS ____________________________________12
3.5 VIEWINGSTORED TESTRESULTS ________________________________________ 12
3.6 VIEWINGSTATISTICALDATAAND TEST FAILURES _____________________________ 12
3.7 ERASINGTHETESTRESULTSMEMORY ____________________________________13
3.8 SETTINGTHECLOCKTIMEAND DATE _____________________________________ 13
3.9 ADJUSTINGTHELCDCONTRAST ________________________________________14
3.10 QUICKBOOT ____________________________________________________ 14
3.11 STANDBYMODE __________________________________________________ 14
3.12 BOLDTEXT______________________________________________________ 15
3.13 SAVETESTS _____________________________________________________ 15
4. SAMPLEMEASUREMENTSAND TESTRESULTS ___________________________ 17
4.1 TAKINGA SAMPLEMEASUREMENT ______________________________________ 18
4.2 PERFORMINGA RETEST ______________________________________________19
5. INSTALLINGSURETREND DATA ANALYSISSOFTWARE _____________________ 19
5.1 CONDITIONSOFUSE ________________________________________________19
5.2 HARDWAREAND SOFTWAREREQUIREMENTS _______________________________ 20
5.3 STARTINGTHEINSTALLPROCESS ________________________________________20
5.4 USINGTHESURETREND SOFTWARE ______________________________________ 20
5.5 INSTALLINGTHEUSBSMARTCABLEDRIVER ________________________________ 21
To Next Page
Loading...
