Now rem ove t he test ing device and dispose of it . Prev ious test result s
can be viewed by pressing the and but t ons (see sect ion 3.5) , or
the result s st at istical dat a can be obt ained by pressing the but t on
(see section 3.6) .
TI P: The lum inom eter can be recalibrated by rem oving the test ing
device, closing the lid and then pr essing and holding down the
but t on for 1 second. The lum inom et er w ill then perform a 15- second
zero m easur em ent .
4 .2
Pe r f o r m in g a Re t e st
When v iewing a failed t est result ( see sect ions 3.5
and 4 .2 ), the progr am locat ion can be selected for
ret esting by pressing the button, followed by the
but t on:
N OTE: I t is only possible t o select a program location
for retest if t he most recent test result for that locat ion was a failure
.
Having select ed ret est m ode (signified by the icon nex t to the
Pr o g : , perform t he sam ple measurem ent in the usual way , using a
new t esting dev ice. ( see sect ion 4.1) .
Once t he ret est m easurem ent is com plete, the original failed test
result is m arked with the icon, and the new t est result is t agged
wit h the icon:
N OTE: Retest m ode is autom at ically deselected once t he new
m easurement is com plet e, or can be m anually cancelled by pressing
the button and select ing a new program locat ion.
5 .
I n st al l i n g Su r e Tr en d D a t a A n a l y si s So f t w ar e
The test result s stored in t he lum inom et er 's mem ory can be uploaded
to a PC using the Sur eTrend Dat a Analysis soft w are. The softwar e is
supplied on t he CD wit h the lum inom eter.
5 .1
Co n d i t io n s o f Use
As Hygiena LLC has no cont r ol over the specification, stat e or use of
any com put er equipm ent on which t his soft w are is installed or used,
the following Condit ions of Use apply .
To Next Page
Loading...
