HygroMatik Basic - Page 19

Page 19
Parameter
Set U6 to “PI-control” and
E3 to “0-20 V”
the desired relative humidity
value is set at Parameter P8)
Parameter
Set U6 to “PI-control” and
E3 to “0-10 mA”;
(the desired relative humidity
value is set at Parameter P8)
Parameter
Set U6 to “PI-control” and
E3 to “0-20 mA”;
(the desired relative humidity
value is set at Parameter P8)
Parameter
Set U6 to “PI-control” and
E3 to “0-140 Ohm”;
(the desired relative humidity
value is set at Parameter P8)
Basic
Comfort / Comfort Plus
Setting for Sensor Signal:
0(4)-20 V DC
Setting for Sensor Signal:
0(2)-10 mA DC
Setting for Sensor Signal:
0(4)-20 mA DC
Setting for Sensor Signal:
0- 140 Ohm