HPR130XD Auto Gas – 806330 3
Changed
Page
Description of change for revision 2 (date of revision - 9/2011)
6-3 Added 415 V main transformer.
6-4 and 6-15 Added 415 V to the note. Changed the main contactor part number from 003139 to 003251.
6-5
Removed power distribution board call out and part number and moved it to the next page. Added
“127039*** Fan (for pump motor): 230 cfm, 115 VAC, 50-60 Hz” and the note *** 415 volt power
supply only” at the bottom of the page.
6-6
Added the part numbers for the fuses on the power distribution board. Added the part number for the
415 volt control transformer.
6-8
The part numbers for the solenoid valves (006136 and 006109) were listed incorrectly (reversed).
Changed the quantity for part number 006109 from 2 to 13 to reflect the number in the console.
6-13 Corrected the quantity for nozzle part number 220182 from 4 to 3.
6-14
Added part numbers to Consumables for mirror image cutting for 80 amp and 130 amp mild steel
bevel cutting.
Schematics All sheets updated from revision A to revision B.
Appendix A Updated to the latest information and formatting for the Hypertherm torch coolant data (MSDS)
Appendix B
Added the secondary error code ID numbers after the primary error code ID number, for all applicable
error codes.
b-6 Added information to the description of the “HELLO” command.
b-19 Added command numbers 136 and 158 to th ecommand table.
b-21 Added error code number 11.
b-24 Added error code numbers 161, 182, and 383.
Appendix C Updated TOC to include new items.
C-2 Added metric conversions for gas lead lengths. Added graphic of the ohmic contact extension.
C-3
Added graphics for the rotational mounting sleeve, the rotational mounting sleeve clamp, the leather
over wrap, and the robotic teaching torch. Also added a dimensional drawing for the torch and
rotational mounting sleeve.
To Next Page
Loading...
Need help?
General
