User Menu
Revision D Display and Menu Options 3-7
U
SER
M
ENU
The User Menu consists of several items which can be modified using the Smart DC Controller buttons. Refer
to
Using the Smart DC Controller Buttons In Menu Mode
.
To access the User Menu, take the following steps:
1. At a gate status display, press the MENU button. The
operator status displays scroll past and the CLOSE
TIMER display appears.
Note:To bypass the operator status displays and access the
User Menu, you can press the MENU button
twice.
2. Press the NEXT button to cycle through the available
menu items.
3. Review Table 3-1 on page 3-12 which supplies the factory defaults for the User Menu items and references
the hard-wire connections.
In the pages that follow, a detailed view of the more commonly used menus is provided:
• Adjusting the Close Timer
• Setting the Time & Date
• Setting the AC Power Loss Gate Function
• Adjusting the Display Contrast
For information on how the menu buttons function, review
Using the Smart DC Controller Buttons In Menu
Mode.
CT 0 (OFF)
CLOSE TIMER
OPEN
CLOSE
STOP
MENU
RESET
PREV
NEXT
SELECT
To Next Page
Loading...
Need help?
General
