Chapter 6. IBM System x3850 X5 and x3950 X5 243
Figure 6-18 Selecting Legacy Only for a Boot option
Besides adding Legacy Only to the Boot Manager, you must also change the sequence to
place Legacy Only at the top of the boot sequence. To change the boot order from within the
Boot Manager panel, select Change Boot Order. Figure 6-19 shows how the boot order
panel is activated by pressing Enter and then selecting the item to move by using the arrow
keys. When Legacy Only is selected, use the plus (+) key to move it up the panel.
Figure 6-19 Change Boot Order panel
To Next Page
Loading...
