396 IBM eX5 Implementation Guide
8.5 UEFI settings
Unified Extensible Firmware Interface (UEFI) is an interface that takes care of handing over
the pre-boot environment to the operating system. UEFI is effectively the replacement for
BIOS. BIOS has been around for many years but it was not designed to handle the amount of
hardware that can be added to a server today.
New IBM System x models, including the HX5, implement UEFI to take advantage of its
advanced features. You access UEFI by pressing F1 during the system initialization process,
as shown on Figure 8-31.
Figure 8-31 UEFI window on system start-up
Figure 8-32 on page 397 shows the main UEFI System Configuration and Boot Management
panel.
To Next Page
Loading...
Need help?
General