352 IBM eX5 Implementation Guide
Figure 7-48 Define the source and target
5. When the file copy process completes successfully, as shown in Figure 7-49, click Finish.
Figure 7-49 Copy process completes successfully
6. Open a command prompt and change to the C:\sgshare\sgdeploy\SGTKWinPE directory.
Use the following command to create the Windows installation image:
SGTKWinPE.cmd ScenarioINIs\Local\Win2008_R2_x64_EE.ini
7. When the process completes, as shown in Figure 7-50 on page 353, your media creation
software is started to create a bootable media from the image. Cancel this task.
To Next Page
Loading...
