364 IBM eX5 Implementation Guide
Figure 7-59 Edited ESX installation Boot Options
4. Proceed with ESX installation until you get to the Setup Type page, as shown in
Figure 7-60. Click Advanced setup, clear Configure bootloader settings automatically
(leave checked if unsure), and click Next.
Figure 7-60 ESX installation Setup Type
5. Continue with the installation until you get to the Set Bootloader Options page, as shown
in Figure 7-61 on page 365, and type the following parameter in the Kernel Arguments
field:
allowInterleavedNUMAnodes=TRUE
To Next Page
Loading...
