452 IBM eX5 Implementation Guide
Figure 9-4 IMM Login web page
Enter the default user name, which is USERID. This user name is case-sensitive. Enter the
default password, which is PASSW0RD. You must use a zero in place of the letter “o” in the
password.
See the User’s Guide for Integrated Management Module - IBM BladeCenter and System x at
the following website for the additional configuration settings of the IMM:
http://ibm.com/support/entry/portal/docdisplay?lndocid=MIGR-5079770
Accessing an HX5 blade for out-of-band management
The HX5 has an IMM on board but the IMM does not have direct access to the external
network. All management tasks directed to the IMM are passed using the AMM. As long as
the AMM is connected to the network, the HX5 can be managed out-of-band via the AMM.
To manage an HX5, log in to the AMM by typing the IP address of the AMM into a supported
web browser, as shown in Figure 9-5 on page 453.
Enter the default user name, which is USERID, for the AMM. This user name is case-sensitive.
Enter the default password, which is PASSW0RD. You must use a zero in place of the letter “o” in
the password.
To Next Page
Loading...
Need help?
General