EasyManuals Logo

IBM Flex System p260 User Manual

IBM Flex System p260
524 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #193 background imageLoading...
Page #193 background image
B7006955
Explanation: Informational system log entry only.
Response: No corrective action is required.
B7006956
Explanation: An NVRAM failure was detected.
Response: Go to Isolating firmware problems.
B7006965
Explanation: Informational system log entry only.
Response: No corrective action is required.
B7006970
Explanation: PCI host bridge failure
Response:
1. Replace the system-board, as described in Replacing the system-board and chassis assembly.
2. If the problem persists, use the PCI expansion card (PIOCARD) problem isolation procedure to determine the
failing component.
B7006971
Explanation: PCI bus failure
Response:
1. Use the PCI expansion card (PIOCARD) problem isolation procedure to determine the failing component.
2. If the problem persists, replace the system-board and chassis assembly, as described in Replacing the
system-board and chassis assembly.
B7006972
Explanation: System bus error
Response: Replace the system-board and chassis assembly, as described in Replacing the system-board and chassis
assembly.
B7006973
Explanation: System bus error
Response:
1. Use the PCI expansion card (PIOCARD) problem isolation procedure to determine the failing component.
2. If the problem persists, replace the system-board and chassis assembly, as described in Replacing the
system-board and chassis assembly.
B7006955 • B7006973
Chapter 8. Troubleshooting 181

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the IBM Flex System p260 and is the answer not in the manual?

IBM Flex System p260 Specifications

General IconGeneral
BrandIBM
ModelFlex System p260
CategoryServer
LanguageEnglish

Related product manuals