IBM Flex System p260 - Page 203

BA000032
Explanation: The firmware failed to register the lpevent queues
Response:
1. Reboot the server.
2. If the problem persists, Search RETAIN tips and the firmware change history for the reference code to determine
the recommended actions. If a firmware update is needed, see Updating the firmware
BA000034
Explanation: The firmware failed to exchange capacity and allocate lpevents
Response:
1. Reboot the server.
2. If the problem persists: Search RETAIN tips and the firmware change history for the reference code to determine
the recommended actions. If a firmware update is needed, see Updating the firmware
BA000038
Explanation: The firmware failed to exchange virtual continuation events
Response:
1. Reboot the server.
2. If the problem persists: Search RETAIN tips and the firmware change history for the reference code to determine
the recommended actions. If a firmware update is needed, see Updating the firmware
BA000040
Explanation: The firmware was unable to obtain the RTAS code lid details
Response:
1. Reboot the server.
2. If the problem persists: Search RETAIN tips and the firmware change history for the reference code to determine
the recommended actions. If a firmware update is needed, see Updating the firmware
BA000050
Explanation: The firmware was unable to load the RTAS code lid
Response:
1. Reboot the server.
2. If the problem persists: Search RETAIN tips and the firmware change history for the reference code to determine
the recommended actions. If a firmware update is needed, see Updating the firmware
BA000032 • BA000050
Chapter 8. Troubleshooting 191