CA00D00C
Explanation: The partition firmware is about to search for an NVRAM script
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00D00D
Explanation: Evaluating NVRAM script
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00D010
Explanation: First pass open firmware initialization complete; establish parameters for restart
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00D011
Explanation: First pass open firmware initialization complete; control returned to initialization firmware
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00D012
Explanation: Second pass open firmware initialization complete; control returned to initialization firmware
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00D013
Explanation: Runtime open firmware initialization complete; control returned to initialization firmware
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00D00C • CA00D013
266 Power Systems: IBM Flex System p260 and p460 Compute Nodes Installation and Service Guide
To Next Page
Loading...
