IBM Flex System p260 - Page 289

CA00E1A4
Explanation: User requested boot to SMS menus
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00E1A5
Explanation: User requested boot to open firmware prompt
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00E1A6
Explanation: User requested boot using default service mode boot list
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00E1A7
Explanation: User requested boot using customized service mode boot list
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00E1AA
Explanation: System boot check for NVRAM settings
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00E1AB
Explanation: System booting using default service mode boot list
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00E1A4 • CA00E1AB
Chapter 8. Troubleshooting 277