EasyManua.ls Logo

IBM Flex System p260 - Page 291

IBM Flex System p260
524 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CA00E1B3
Explanation: XON received
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00E1B4
Explanation: System-directed boot-string didn't load an operating system
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00E1B5
Explanation: Checking for iSCSI disk aliases
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00E1D0
Explanation: Create PCI self configuring SCSI device (SCSD) node
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00E1D3
Explanation: Create SCSD block device node (SD)
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00E1D4
Explanation: Create SCSD byte device node (ST)
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00E1B3 CA00E1D4
Chapter 8. Troubleshooting 279

Table of Contents

Related product manuals