IBM Flex System p260 - Page 298

CA00E876
Explanation: Initializing rtas_error_inject
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00E877
Explanation: Initializing dump interface
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00E879
Explanation: Initializing the platform-assisted kdump interface
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00E885
Explanation: Initializing set-power-level
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00E886
Explanation: Initializing exit2c
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00E887
Explanation: Initialize gdata for activate_firmware
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00E876 • CA00E887
286 Power Systems: IBM Flex System p260 and p460 Compute Nodes Installation and Service Guide