IBM Flex System p260 - Page 328

652-89X
Explanation: The CEC or SPCN reported a non-critical error.
1. Schedule deferred maintenance.
2. Refer to the entry MAP in this system unit system service guide, with the 8-digit error and location codes, for the
necessary repair action.
3. If the 8-digit error and location codes were NOT reported, then run diagnostics in problem determination mode
and record and report the 8-digit error and location codes for this SRN.
Response:
814-112
Explanation: The NVRAM test failed. Go to Performing the checkout procedure.
Response:
Failing Item:
v FFC_814
814-113
Explanation: The VPD test failed. Go to Performing the checkout procedure.
Response:
Failing Item:
v FFC_221
814-114
Explanation: I/O Card NVRAM test failed. Go to Performing the checkout procedure.
Response:
Failing Item:
v FFC_814
815-100
Explanation: The floating-point processor test failed. Go to Performing the checkout procedure.
Response:
Failing Item:
v FFC_815
652-89X • 815-100
316 Power Systems: IBM Flex System p260 and p460 Compute Nodes Installation and Service Guide