Changes to the MultiStore Management Guide
Some additional information has become available since the last revision of
Data ONTAP 8.0 7-Mode MultiStore Management Guide and there are some
changes to the existing content.
v “Correction to the effects of storage system reboot on a vFiler unit”
v “Requirement for backup and replication operations on vFiler units”
v “Naming guidelines for vFiler units”
v “SnapMirror relationship schedules are not modified for existing volumes”
on page 145
v “Corrections to the List of RSH and SSH commands” on page 145
v “Corrections to the SnapVault support on vFiler units” on page 145
Correction to the effects of storage system reboot on a vFiler unit
The topic "Effects of storage system reboot on a vFiler unit" includes an
incorrect word.
The following sentence includes an incorrect word: When you stop a vFiler
unit and then reboot the storage system, the stopped iremen starts running
again after the reboot.
The corrected sentence is as follows: When you stop a vFiler unit and then
reboot the storage system, the stopped vFiler unit starts running again after
the reboot.
Requirement for backup and replication operations on vFiler units
When performing SnapVault, ndmpd, and SnapMirror operations on a vFiler
unit, you must ensure that the root of the vFiler unit is a volume. This
information is missing in the Data ONTAP 8.0 7-Mode MultiStore Management
Guide.
Naming guidelines for vFiler units
Information about the guidelines you require when naming a vFiler unit is
missing in the Data ONTAP 8.0 7-Mode MultiStore Management Guide.
To create or rename a vFiler unit successfully, you must be aware of the
following guidelines when naming a vFiler unit:
v The name can contain up to 31 alphanumeric ASCII characters.
v The name can contain the dash (-) and the underscore (_) characters.
However, the name should not begin with a dash.
v The name is case-insensitive.
v The name must be unique.
144 IBM System Storage N series: Data ONTAP 8.0.4 7-Mode Release Notes
To Next Page
Loading...
Need help?
General