IBM N Series - Changed Options in Data ONTAP 8.0 7-Mode

Changed options in Data ONTAP 8.0 7-Mode
This table lists options that have changed or become obsolete.
For each option, the following table gives this information:
v The name of the changed option
v The nature of the change
v The Data ONTAP 8.0 7-Mode release in which the change was introduced
For more information about the options command and individual options, see
the na_options(1) man page.
Command Change
Release
introduced
autosupport.minimal.subject.id The default for this option has been
changed to systemid for systems
shipped with Data ONTAP 8.0.2
7-Mode or later.
8.0.2
cifs.max_mpx The default for this option has been
changed to 253.
8.0.2
flexscale.max_io_qdepth This option has become obsolete. 8.0
httpd.admin.enable The default for this option has been
changed to off for systems shipped
with Data ONTAP 8.0 7-Mode or
later.
8.0
httpd.admin.ssl.enable The default for this option has been
changed to on for systems shipped
with Data ONTAP 8.0 7-Mode or
later.
8.0
rsh.enable The default for this option has been
changed to off for systems shipped
with Data ONTAP 8.0 7-Mode or
later.
8.0
ssh.enable The default for this option has been
changed to on for systems shipped
with Data ONTAP 8.0 7-Mode or
later.
8.0
ssh2.enable The default for this option has been
changed to on for systems shipped
with Data ONTAP 8.0 7-Mode or
later.
8.0
New and changed commands and options 59