The wrfile command might fail to capture all input during a cut-and-paste operation performed
through the RLM or SP ..........................88
NTP version used to communicate with a newly configured NTP server defaults to v3 .....89
RLM configuration is not saved if the RLM's Ethernet cable is not connected ........89
If your system uses rtc or rdate as the protocol for time synchronization .........89
Obsolete timed options ..........................89
Issues regarding the timed log........................90
Shutdown delay in N3400 systems when critical thresholds are crossed ..........90
Storage resource management issues.......................91
Writes to a LUN fail when the combined size of the LUN and the change log is greater than the
volume size ..............................91
Configuring user mapping for a default user quota with CIFS licensed but not configured could
severely degrade performance ........................91
After changing the port assigned to ACP, a reboot is required to regain use of the original port . . 91
Moving disks to a system running an earlier version of Data ONTAP could cause disk
identification issues ...........................91
Data ONTAP can silently select varying disk sizes or array LUN sizes when creating an aggregate 92
Adding disks when varying sized disks are in use ................92
Discovering what disks Data ONTAP will automatically select ............93
SSD Spare blocks consumed limit reported as N/A.................93
High-availability pair issues .........................94
Storage system in an HA pair might get rebooted during a controller or NVRAM replacement . . 94
If takeover is enabled for network interface failure, automatic giveback should be disabled . . . 94
Network protocol issues ...........................95
Partner node might be unavailable during controller failover when an interface name is used as an
alternate host name in the /etc/hosts file ....................95
Change in routing configuration maximum value .................95
NIS group file entries should not exceed 1024 characters per line ............95
File access protocol issues ..........................96
Value of the option nfs.ifc.rcv.high is unexpectedly reset ...............97
Enabling new EMS messages to help troubleshoot Kerberos issues ...........97
Microsoft Windows 7 clients fail to rename files and directories ............97
File copy operation on a widelink path inside a CIFS share might fail when using SMB 2.x . . . 98
Domain controller responds with an access denied error to an SMB 2.x tree connect request . . . 98
Controlling NFS requests from nonreserved ports .................98
Enabling or disabling NFSv2 ........................99
Error NFS4_BADOWNER when NFSv4 client passes UID as string ...........99
Domain user unable to execute CLI commands..................100
CIFS shares with comment ending with backslash disappear .............100
Removing stale entries from the access cache ..................100
CIFS authentication failure with Windows Server 2008 R2 read-only domain controllers ....100
Too many CIFS audit files can cause system performance degradation ..........101
CIFS client authentication fails if host name exceeds 16 characters ...........101
Failed CIFS connections due to signature mismatch ................101
Configuring user mapping for a default user quota with CIFS licensed but not configured could
severely degrade performance .......................101
Excessive pending CIFS authentication requests can cause service disruption ........102
Client notification messages in Windows domains require NetBIOS ...........102
Configuration issue for clients that mount NFS shares using a non-reserved port ......102
Widelinks are not accessible from Mac clients ..................103
vi IBM System Storage N series: Data ONTAP 8.0.4 7-Mode Release Notes
To Next Page
Loading...
Need help?
General