MAP 2400 (continued)
088 (continued)
Replace the display.
089
– Answer each question of the VGA test by pressing either Y or N, then
press Enter.
DID YOU ANSWER YES TO ALL OF THE QUESTIONS?
Yes No
090
Replace the display.
091
IS “EXTENDED MODE TESTS” AN OPTION ON THE LIST OF OPTIONS?
Yes No
092
If you have a 486SX, 486DX, or 486DX2 (72-pin memory SIMM)
system board, run the Setup program, and check the display type. If
the display is VGA, this option will not be available. If the display is
SVGA, change the display type to the proper setting and run the test
again.
– Go to Step 095 on page 2-115.
093
– Press 8 (EXTENDED MODE TEST).
Note: The Extended Mode Test checks the SVGA. The color bars and
blocks should appear as various color shades of Red, Green, and
Blue.
DID YOU ANSWER YES TO ALL OF THE QUESTIONS?
Yes No
094
Replace the display.
2-114
To Next Page
Loading...
