IBM PS/1 User Manual

2030—Hard Disk Drives
First Hard Disk Drive
Cover (2005).
Disconnect any cables on the drive.
Remove the screws.
Slide the hard disk drive to the rear and tilt to remove.
Note: Refer to Appendix, “Model Configurations and FRU Part Numbers”
on page A-1 and install the correct software. For European models, refer to
Table A-5 on page A-11 for the correct software.
Hard Disk
Figure 4-23. First Hard Disk Drive
Repair Information 4-33

IBM PS/1 Specifications

General

Processor	Intel 80286 or 80386
Processor Speed	10 MHz (80286)
RAM	1 MB (expandable to 2 MB or more)
Storage	40 MB hard drive
Floppy Drive	3.5" 1.44 MB
Graphics	VGA
Ports	Serial, Parallel, Mouse