EasyManua.ls Logo

IBM PS/1 - Page 23

IBM PS/1
304 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Upgrade processor socket.
Supports 8K internal cache.
Supports 0, 128K, or 256K external cache (field upgradeable).
Shipped with 128K standard.
Four 72-pin system memory sockets (one is populated with
either a 4MB or 8MB SIMM). Memory speed is 70 ns.
Maximum memory is 64MB. Refer to “System Memory” on
page 1-20 and to “System Board Layouts” on page 5-2.
1MB video RAM soldered on the system board (not field
upgradeable).
Ports include: two serial, parallel, keyboard, mouse, and video.
Connectors for AT riser card (120-pin), input power (12-pin), AT
diskette drives (34-pin), IDE AT hard disk drives (40-pin),
power LED/hard disk LED (4-pin), and video feature (26-pin).
Lithium battery.
Power supplies with CPU power switch
Machine Type 2133 contains a 65-W low voltage power supply with fan
and a connector for a detachable grounded 3-wire power cord. The
power cable has three DASD connectors: one 3.5-inch diskette drive
mini power connector and two standard 4-pin power connectors.
For countries with high voltage requirements, Machine Type 2133 con-
tains a 65-W high voltage power supply with a switched appliance con-
nector.
Machine Type 2155 contains either an 85-W low voltage power supply
or a 145-W switchable power supply with a fan and a connector for a
detachable grounded 3-wire power cord. The 85-W low voltage power
supply contains a nonswitched appliance connector. Its power cable
has four DASD connectors: one 3.5-inch diskette drive mini power con-
nector and three standard 4-pin power connectors. The 145-W
switchable power supply contains a switched appliance connector. Its
power cable has four DASD connectors: one 3.5-inch diskette drive
mini power connector and three standard 4-pin power connectors.
Machine Type 2155 and Machine Type 2168 contain a 145-W
switchable high/low voltage power supply with a fan and a connector for
a detachable grounded 3-wire power cord. The power supply also has
a switched appliance connector. The power cable has four DASD con-
nectors: one 3.5-inch diskette drive mini power connector and three
standard 4-pin connectors.
Cables
General Information 1-9

Table of Contents

Related product manuals