017 (continued)
DOES THE SYSTEM FUNCTION NORMALLY EXCEPT FOR THE
3.5-IN DISKETTE?
Yes No
018
Go to Step 038 on page 2-64.
019
Go to Step 034 on page 2-63.
020
(From steps 006 and 015)
– Press 0 (SYSTEM CHECKOUT), then press Enter.
– When the Installed Devices list appears, press Y, then press Enter.
Regardless of the number of diskette drives shown, you must answer Yes
to the Installed Devices list to continue testing.
– Press 0 (RUN TESTS ONE TIME), then press Enter.
– Press 6 (DISKETTE DRIVE), then press Enter.
Note: Do not run the individual tests until instructed to do so by this
MAP.
DID THE DISKETTE DIAGNOSTIC MENU APPEAR WITHOUT AN
ERROR?
Yes No
021
Go to Step 024 on page 2-62.
022
– Run all tests.
(Step 022 continues)
Diagnostic Information 2-61
To Next Page
Loading...
