To remove a hot-swap power supply, complete the following steps.
Hot-swap power
supply
Release lever
1. Read the safety information that begins on page vii and “Installation guidelines”
on page 73.
2. Disconnect the power cord from the power supply that is to be removed.
3. Press down on the orange release lever and pull the power supply out of the
bay, using the handle.
4. If you are instructed to return the power supply, follow all packaging instructions,
and use any packaging materials for shipping that are supplied to you.
Chapter 4. Removing and replacing server components 99
To Next Page
Loading...
Need help?
General