Table 41. FCs for the frame models of the TS4500 tape library (continued)
FC Model CSU Description
9970 D25, D55, L25, L55, S25, S55 No Dual 4.3m power cord (international, 250
VAC 16A single phase, watertight
connector, IEC-309)
FC 9970 includes model-dependent
contents. For countries other than the
United States and Canada the connector is
rated at 16A (plug type Hubbell
HBL316P6W or equivalent) for connection
to Hubbell type HBL316R6W or equivalent
receptacles.
In the United States and Canada the
connector is rated at 20A (plug type
Hubbell HBL320P6W) for connection to
Hubbell type HBL320R6W or equivalent
receptacles. This is the default power cord
for all countries other than those specified
for FC 9972 and FCs 9976 through 9983.
This power cord can be used for all
countries except:
v Japan
v Korea
v Philippines
v Taiwan
v Argentina
v Brazil
v Australia
v New Zealand
v China
v South Africa
Note: Only 1 power cord is shipped for an
S25 and S55 to be used in conjunction with
FC2737
9972 D25, D55, L25, L55, S25, S55 No Dual 4.3m power cords (250 VAC 15,
non-watertight twist lock connector,
Nema L6-15P mates with L6-15R)
FC 9972 includes model-dependent
contents. It is the default power cord for
US, Canada, Japan, Korea, Philippines, and
Taiwan.
Note: Only 1 power cord is shipped for an
S25 and S55 to be used in conjunction with
FC2737
9976 D25, D55, L25, L55, S25, S55 No Dual 4.3m power cords with 10 Amp/250
Vac, non watertight IRAM 2073 plug
FC 9976 is for Argentina.
Note: Only 1 power cord is shipped for an
S25 and S55 to be used in conjunction with
FC2737
106 IBM TS4500: Introduction and Planning Guide
To Next Page
Loading...
Need help?
General
