Onsite security measures
You are also responsible for evaluating, selecting, and implementing security
features, administrative procedures, and appropriate controls in application
systems and communication facilities.
Data security
Data security is accomplished through the TS4500 management GUI. For more
information, see the IBM TS4500 customer online documentation in the IBM
Knowledge Center.
Move restraints
The TS4500 tape library has several move restraints (adjustable points) that you
can use to restrain the unit from potential movement (such as an earthquake). Use
the diagram as a guide to help you locate the move restraints.
Restraining points are at the bottom of the unit (see ▌1▐ in Figure 14). There are
four restraining points at the bottom four corners of each frame. Affix restraints to
each of the four points (two on each long side) and secure the library as needed.
The restraint points provide threaded holes, thread size M10.
Figure 14. Location of restraining points. Two restraining points are on each long side of the library.
76 IBM TS4500: Introduction and Planning Guide
To Next Page
Loading...
