Ensure proper packaging of LTO tape cartridges
LTO tape cartridges must be packed and shipped according to specific guidelines
in order to ensure they are not damaged during transport.
Adhere to the following guidelines when packaging or shipping LTO tape
cartridges:
v When you ship a cartridge, ship it in its original or better packaging.
v Always ship or store a cartridge in a jewel case.
v Use only a recommended shipping container that securely holds the cartridge in
its jewel case during transportation. LTO Turtle Cases (by Perm-A-Store) have
been tested and found to be satisfactory (see Figure 32). They are available at
http://www.turtlecase.com.
v Never ship a cartridge in a commercial shipping envelope. Always place it in a
box or package.
v If you ship the cartridge in a cardboard box or a box of a sturdy material, ensure
that the following precautions are taken:
– Place the cartridge in polyethylene plastic wrap or bags to protect it from
dust, moisture, and other contaminants.
– Pack the cartridge snugly to ensure that it does not move around.
– Double-box the cartridge (place it inside a box, then place that box inside the
shipping box) and add padding between the two boxes (see Figure 33 on page
124).
Figure 32. Tape cartridges in a Turtle Case
Chapter 2. Planning 123
To Next Page
Loading...
Need help?
General