4000000f-00000000 Attempting to [arg1] server [arg2] by user [arg3].
Explanation: This message is for the use case where a user is using the Management Controller to perform a power
function on the system.
May also be shown as 4000000f00000000 or 0x4000000f00000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0015
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
40000010-00000000 Security: Userid: [arg1] had [arg2] login failures from WEB client at IP address [arg3].
Explanation: This message is for the use case where a user has failed to log in to a Management Controller from a
web browser.
May also be shown as 4000001000000000 or 0x4000001000000000
Severity: Warning
Alert Category: System - Remote Login
Serviceable: No
CIM Information: Prefix: IMM and ID: 0016
SNMP Trap ID: 30
Automatically notify Support: No
User response: Complete the following steps until the problem is solved:
1. Make sure that the correct login ID and password are being used.
2. Have the system administrator reset the login ID or password.
40000011-00000000 Security: Login ID: [arg1] had [arg2] login failures from CLI at [arg3].
Explanation: This message is for the use case where a user has failed to log in to a Management Controller from the
Legacy CLI.
May also be shown as 4000001100000000 or 0x4000001100000000
Severity: Warning
Alert Category: System - Remote Login
Serviceable: No
CIM Information: Prefix: IMM and ID: 0017
SNMP Trap ID: 30
Automatically notify Support: No
User response: Complete the following steps until the problem is solved:
1. Make sure that the correct login ID and password are being used.
2. Have the system administrator reset the login ID or password.
4000000f-00000000 • 40000011-00000000
348
IBM System x3550 M4 Type 7914: Installation and Service Guide
To Next Page
Loading...
Need help?
General
