8
MDC 1200 SYSTEM OPERATION
8-13
D Transmitting an MDC Revive call (Continued)
<Menu operation>
Portable: For the Ten-key and the Simple key types
Mobile: For the LCD type
(Menu > Signaling/Call > Call Menu)
1. Push [Menu] to display the Menu screen.
2. Push [Left] or [Right] to select “Signaling/Call,”
then
push [OK].
3. Push [Up] or [Down] to select “Call Menu,” then
push [OK].
4. Push [Up] or [Down] to select a station ID, then
push [OK].
5. Push [Up] or [Down] to select “Revive.”
6. Push [PTT] to transmit an MDC Revive call.
• After receiving an acknowledgement, “Success” is
displayed.
• When the transceiver does not receive an
acknowledgement, “Failed” is displayed.
• After transmitting the Revive call, returns to the
Standby screen.
Transmitting a call (Continued)
To Next Page
Loading...
