Icom F6400DS 11 - Setting or Clearing a Scan Tag

5
SCAN OPERATION
5-5
Setting or clearing a Scan tag
You can set or clear a Scan tag to or from a channel in
a Scan list.
The Scan tag channel is a target channel during a
Scan.
<Key operation>
Portable: For the Ten-key and the Simple key types
Mobile: For the LCD type
In a current Scan list:
1. Select a channel. (p. 3-4)
2. Push [Scan Add/Del (Tag)] to set or clear a Scan
tag to or from the channel.
• “ ” is displayed for a Scan tag channel.
When setting a Scan tag:
When clearing a Scan tag:
In a selected Scan list:
1. Select a channel. (p. 3-4)
2. Hold down [Scan Add/Del (Tag)] for 1 second to
display the “Scan tag” screen.
3. Push [Up] or [Down] to select a Scan list.
4. Push [OK] to set or clear a Scan tag to or from the
channel.
When setting a Scan tag:
When clearing a Scan tag:
5. Hold down [Back] for 1 second to return to the
standby screen.
Previous view